Talk:SOFA conventions

Headphone transfer functions (HpTFs)

Measured data exist as IRs. More information on metadata and measurement setups required. Corresponding researchers contacted. Waiting for response...

Include anthropometric data (AD)

Several request received on "include AD in SOFA". But none of them could specify what actually to store. What is clear that AD stored with CIPIC are not sufficient. In ARI more AD are store than in CIPIC, but there is no proof that these AD are of any use. So?

Crosstalk cancellation filters (CTCFs)

When saving HRTFs, why not save CTCFs? Check and discuss how the representation of CTCFs differs from the representation of HRTFs. It might be that SimpleFreeFieldHRIR is sufficient and the difference between HRTFs and CTCFs is simple the interpretation. Then, a note in GLOBAL_Comment might be sufficient.

Include calibration data

• Are data available?
• Is a description of the measurement setup available?
• What metadata should be stored?
• How to standardize the description of the calibration?

Corresponding researchers contacted, waiting for response...

Calibration data can hav several forms, depending on the measurment in question. If the measurement is a transfer function, and that it it's intention, then one could provide the measured transfert funciton of the measurement chain wihtout the measurment object present. In the case of the HRTF, this is the measured transfer function wihtout the head present. As there are various means of removing the effects of the measurement chain (deconvolution, spectral equalizing) the "calibrated" final data may vary between methods. If the object if to provide the data in its most raw form, for other researchers to use, the uncalibrated data, along with necessary calibration files, is of interest. In this way, the frequency response of the key elements, notably the microphone and speakers, can be both examined and taken into account. In the context of HRTF measurments which use mutliple speakers, the calibration of each speaker is crucial in order to avoid spectral coloration which is independant of the head response and therefor an artifact of the measuremet system. In such a case, impulse responses should be provided for each speaker, with the microhpone oriented on-axis to the speaker. This can be performed with the measuremnet microphones used for the data acquisition, or a calibrated measurement microphone, whose model should be clearly stated. If the second is employed, a microphone measurement file is alse necessary, consiting of a calibration measurment for a single speaker and the accompanying impulse response of all 3 microphones (again, in the case of and HRTF mesurement). For a truly robust analysis of the data, this calibration measurement is made before and after the measurement session, to ensure no time independance of the mesuremnet system, which is not always the case. In such a case that the before/after data do not correspond, the data should not be utilised.

In the case of measurements where the absolute level is of importance, the calibration data is more typically that of a piston/speaker phone which provides a known SPL level. This is of specific interest when distributed microphones are employed to measure the spatial distribution of a sound field. In this instance, the calibration data can either be the noted RMS level of the calibrated source for each microphone (noting of course the model and settings of the calibrated source, and if possible, meterological conditions). To be consistent with the above mentioned HRTF case, the recorded calibration audio file could be provided, again noting the model and settings used.

Include room pictures

• Are data available?
• Is a description of the measurement setup available?
• What metadata should be stored?
• How to standardize the description of the pictures (camera position, room description)? There is FITS for astronomy maybe we can learn from this format?

Corresponding researchers contacted, waiting for response...